Skip to content
Huron HeightsLock & Key Co. · LondonOpen 24/7(226) 777-0127Request a visit
Person holding a black door-handle assembly and a latch beside a glazed door with exposed lock openings. — Smart Lock Installation, London

Change or rekey · London

Smart Lock Installation

The rental turns over every few months and each time you drive across town to swap keys, then wonder whether copies were made. A lock with codes you can set and erase from your phone would end that cycle.

Smart Lock Installation

In plain words

Most of the skill in fitting a smart lock goes into the door rather than the electronics. Motors are patient but not strong, so a bolt that has to be shouldered home will stall, chew through batteries and eventually refuse. The locksmith checks that the bolt slides fully into the strike with the door closed and no hand on it, and corrects hinges, strike pocket or weatherstrip until it does. The bore holes are measured against the new lock's needs, the door's thickness is confirmed, and a reinforced strike goes in with long screws. Only then is the lock mounted, calibrated and programmed.

Sound familiar?

Half the evenings someone asks whether the back door got locked, and nobody is sure. A lock that relocks on its own, shows its state in an app and reports when it was last opened would settle the question.

How the visit goes

London

How the visit goes

  1. Storm doors, sun and weather on the entrance

    The outside of the lock lives in the weather, so the locksmith looks at what the entrance throws at it. A storm door with full glass can turn the space between the doors into an oven on a July afternoon, and electronics have a temperature ceiling; a vented storm door or a model rated for that exposure solves it. A keypad that faces prevailing wind collects driving snow and freezing rain, which argues for a covered entry or a lock with a shielded touch surface. Salt spray from a nearby driveway attacks finishes over time. None of these rule out a smart lock; they steer the choice of model, finish and mounting.

  2. Power up and teach the lock its door

    Once the hardware is tight, the lock gets the batteries its maker specifies, all fresh and all the same type, since mixing old and new cells shortens the life of the set. Most models then run a short calibration in which the motor learns which way is locked, how far the bolt travels and where it meets resistance. The locksmith runs this exactly as that model's instructions direct, door open or closed depending on the maker, then cycles it several times from the keypad and the thumb-turn while listening for a motor that strains. If the lock has a door-position sensor or a magnet to fit on the frame, it is placed and confirmed at this stage.

  3. Keeping the lock healthy through the seasons

    A smart lock asks for a little seasonal attention and rewards it. In spring and autumn, check that the bolt still glides with the door closed and no hand on it; a door that has swollen or dropped starts to strain the motor before it stops working, and a hinge screw or strike adjustment then is far easier than a call later. Keep the keypad free of ice and grit, wipe salt film off the exterior in winter, and use only a dry lubricant on the override cylinder, never oil. Accept firmware updates when the app offers them. If the lock starts to sound laboured, that is its way of asking for a look.

Smart Lock Installation

In the van

  • Hole saw, spade bit and drilling jig
  • Door-position sensor magnet
  • Hinge shims and long hinge screws
  • Dry PTFE lubricant
  • Adjustable-backset bolt and faceplate

What affects the quote

Same fees day, night or weekend

  1. 1Storm door and weather adjustments

    Where the entrance calls for a vented storm door panel, a keypad shield or a model rated for heat and cold exposure, those items are named separately so you can choose them or not.

  2. 2Taking over an existing smart lock

    Resetting, re-enrolling and cleaning the permissions on a lock that came with the property is a different job from fitting new hardware: less cutting, more account work, and it is quoted on its own footing.

  3. 3Finish and matching hardware

    Standard finishes are the base. A less common finish, or replacing the knob or lever at the same time so the door matches, adds to the hardware portion of the quote.

What to have ready

0 of 3 ready

Call (226) 777-0127

Smart Lock Installation: questions

Is a smart lock as secure as a regular deadbolt?

The part that resists force is the same: a steel bolt, a solid strike with long screws and a door that closes true. Smart deadbolts meet the same residential hardware standards as mechanical ones, and a reinforced strike goes in regardless of which you choose. Where a smart lock adds is on the human side: codes that can be revoked and a door that locks itself, plus, on a key-free model, no keys to copy or lose. Good habits, such as unique codes and updates, keep the electronic side tidy.

What information should I have ready when I call?

The door's material and rough thickness, what lock is on it now and whether it is a separate deadbolt above a knob or lever, and whether there is a storm door. Say what you want the lock to do: codes only, phone control, alerts, auto-lock. Mention how the Wi-Fi is at the front door if you know, whether you rent or own, and how many people need their own way in. A photo of the inside and outside of the existing lock is a real help.

I am a landlord. Are smart locks a good fit for my rental?

They suit turnover well: a departing tenant's code is deleted and a new one created without cutting keys or wondering about copies. Two things to plan for. The tenant in place must always have a working way in, which usually means their own code plus a key to the override cylinder, and any lock change on an occupied unit is done with the tenant's knowledge. Set the administrator account up under the property, not a departing employee, so control stays with you.

Change or Rekey Locks

Smart Lock Installation near you

Homes and businesses in London tend to need the same handful of things from a locksmith, so that is how the list is arranged: emergency openings, changing or rekeying locks, stronger hardware for people who want it, commercial doors and access, and safes. Car keys sit at the end for the households that need them.

Open 24/7 · call(226) 777-0127Request a visit